Arts / Crafts
Brand: AIRCRAFT
MPN: SG COMPSP-15
AirCraft Rear Splint Integration SG-COMPSP-15 For Comp 05 And Comp07
At a Glance: Rear plate / end plate assembly with an integrated sealing ring to help maintain alignment and prevent air leaks.
The AirCraft SG-COMPSP-15 Rear Splint Integration is a rear plate (end plate) component for the AirCraft Comp 05 and Comp07 mini compressor range.
This type of plate does two important jobs: it supports correct assembly alignment and it helps seal the compressor internals so pressure go..
N$ 128.92
Ex VAT:N$ 112.10
Brand: AIRCRAFT
MPN: SG COMPSP-16
AirCraft Motor SG-COMPSP-16 For SG-COMP05 And Comp07
At a Glance: Replacement motor for AirCraft mini compressors—built to bring back reliable power and smooth operation.
The AirCraft SG-COMPSP-16 Motor is a replacement motor designed for the AirCraft SG-COMP05 and Comp07 mini compressor range.
When a compressor starts struggling—slow start-ups, inconsistent running, unusual noise, overheating, or sudden stoppages—the motor is often the heart of the problem. Replacing the motor ..
N$ 3,561.38
Ex VAT:N$ 3,096.85
Brand: AIRCRAFT
MPN: SG CP01
AirCraft Mini Paint Cleaning Pot
At a Glance; Mini airbrush cleaning pot for flushing paint and capturing overspray during cleaning
Airbrush cleaning is unavoidable—so it might as well be neat, safe, and low-drama. The AirCraft SG CP01 Mini Paint Cleaning Pot is a compact cleaning station designed to catch overspray and waste paint when you flush your airbrush between colours or at the end of a session. Instead of blasting cleaner and pigment into the air (and onto everything you own), you..
N$ 898.04
Ex VAT:N$ 780.90
Brand: AIRCRAFT
MPN: SG E240
AirCraft Airbrush Spray Booth With Extractor
At a Glance; Portable airbrush spray booth with extractor to help remove overspray and paint mist
Airbrushing indoors is amazing right up until everything within five metres gets a fine, mysterious dusting of colour. The AirCraft SG-E240 Airbrush Spray Booth With Extractor is designed to make indoor and bench-top spraying cleaner and more controlled. This portable booth helps capture overspray and uses an extractor system to help draw paint mist..
N$ 2,472.50
Ex VAT:N$ 2,150.00
Brand: AIRCRAFT
MPN: SG F02
In-line filter for airbrushes
The filter can be directly connected to the airbrush to filter out dust and oil in the air.
The shape of the filter allows you to hold it located in your palm and by doing so, improves the comfort of holding the airbrush.
Easy to drain valve located on the bottom.
Filters out contaminants that could mix with the media in the airbrush.
Thread: 1/8 BSP
Filter element: 5 micron....
N$ 174.17
Ex VAT:N$ 151.45
Brand: AIRCRAFT
MPN: SG F180-1-1
Spare bracket to mount SG F180 filter
This is a spare bracket for the SG F180 filters to mount it to a wall.....
N$ 113.85
Ex VAT:N$ 99.00
Brand: AIRCRAFT
MPN: SG HL01
Airbrush holder - table edge clamp
Holds up to 4 airbrushes and clamps to a table edge.
Includes bracket to mount an inline air regulator.
Suitable for all kinds of
airbrushes.....
N$ 340.23
Ex VAT:N$ 295.85
Brand: AIRCRAFT
MPN: SG HL02
Airbrush holder - table top with suction feet
Holds up to 4 airbrushes at a time.
The steel base has 4 suction cups to secure it on a smooth table top.
Suitable for all kinds of
airbrushes.....
N$ 340.23
Ex VAT:N$ 295.85
Brand: AIRCRAFT
MPN: SG HL04
Airbrush holder - fits on an inline regulator
Holds up to 2 airbrushes at a time.
Unscrew the red plastic locking ring on the top of the inline regulator to fit the airbrush holder. Perfect for airbrush compressors.....
N$ 107.76
Ex VAT:N$ 93.70
Brand: AIRCRAFT
MPN: SG NE01
AirCraft Needle For A182 0.5mm (SG NE01)
At a Glance: Replacement needle for AirCraft Airbrush A182 0.5mm setup—brings back smooth flow and consistent spray control.
A needle is the quiet hero of a good spray finish: when it’s bent, worn, or nicked, your pattern starts misbehaving and your day gets longer.
The AirCraft Airbrush SG NE01 is a replacement 0.5mm needle made for the Airbrush A182 setup, helping restore clean, controlled paint delivery and predictable trigger response.
Perfect..
N$ 136.33
Ex VAT:N$ 118.55
Brand: AIRCRAFT
MPN: SG NE02
AirCraft Needle For A130 / A180 0.3mm (SG NE02)
At a Glance: Replacement 0.3mm needle for AirCraft A130 / A180 airbrushes—brings back smooth flow and crisp detail control.
A tiny bend on a needle can turn a perfect spray session into a mystery of spitting, uneven lines, and “why is it doing that?” frustration.
The AirCraft SG NE02 is a replacement 0.3mm needle designed for the A130 (and compatible A180) airbrush setup, helping restore clean paint delivery, smoother trigger response, and a..
N$ 136.33
Ex VAT:N$ 118.55
Brand: AIRCRAFT
MPN: SG NZ01
AirCraft Nozzle Complete 0.3mm For A130 (SG NZ01)
At a Glance: Complete 0.3mm nozzle assembly for AirCraft A130—restores fine spray control and clean atomisation.
The nozzle is where an airbrush earns its reputation. When it’s worn, cracked, or clogged beyond saving, you’ll see it immediately: spitting, inconsistent lines, and a spray pattern with opinions.
The AirCraft SG NZ01 is a complete 0.3mm nozzle for the A130 airbrush, designed to bring back clean atomisation, smooth paint flow, a..
N$ 209.88
Ex VAT:N$ 182.50